The Gallagher Hanwha VMS Integration allows a Command Centre operator to view live and stored videos as well being able to view video associated with an alarm, (e.g. motion detection alarm) acknowledge and process the alarm in Command Centre.
Use video surveillance to visually compare a cardholder with their cardholder image in Command Centre. If the image matches, the operator can grant access (Controlled Challenge).
View live video in Command Centre
Video is streamed from Hanwha Wisenet WAVE to Gallagher Command Centre. The video is displayed in Command Centre.
- Drag and drop a camera icon from a site plan to a camera tile to view live video.
- Find a camera directly within a camera tile to view live video.
- Pre-configure a camera tile to constantly view live video from one camera.
- Pre-configure a camera tile to display live video in response to an event (e.g. Door event or Intercom event).
- Place multiple camera tiles alongside each other to view video from multiple cameras simultaneously (up to 16 camera tiles can be used to simultaneously display footage on a single Viewer).
- Adjust the camera's Pan, Tilt, and Zoom - as supported by the camera.
- Move a camera to a set position (preset) - as supported by the camera.
- Capture an image of the current frame (the image is saved as a .jpg file to the clipboard).
- View footage in 4K resolution, achieved with H.265 video codec.
- Re-size footage to fit the aspect ratio of the camera tile, or display it in its native aspect ratio.
- A signed certificate is required to view video.
View stored video in Command Centre
Video is stored by Hanwha Wisenet WAVE and retrieved by Gallagher Command Centre. The video is displayed in Command Centre.
- View stored video associated with an alarm.
- View pre-alarm and post-alarm video.
- Drag video playback forwards and backwards to search through stored video.
- Adjust the speed of video playback.
- Toggle the camera between stored video and live video.
- Capture an image of the current frame (the image is saved as a .jpg file to the clipboard).
- View stored video associated with an alarm on a Spot Monitor Viewer.
- A signed certificate is required to view video.
System brand: Hanwha Vision
Product name: Hanwha Wisenet WAVE
Interface developed by: Gallagher
Hanwha software version: Wisenet WAVE v5.0.0.35745
Gallagher Command Centre version: Gallagher Command Centre v8.90 or later
Available and supported: Worldwide
Viewing Live & Stored Footage | Yes |
Play, Pause, Rewind, Fast-Forward | Yes - except Rewind |
Pan/Tilt/Zoom | Yes |
Go to Preset | Yes |
Events Interface | Yes |
Provided by | Gallagher |
Version | Command Centre v8.90 or later, Wisenet WAVE v5.0.0.35745 |
Brand | Hanwha Vision |
Developed by | Gallagher |
Integration Type | Video |